1
$\begingroup$

I'm trying to build an artificial neural network (ANN) using the R "neuralnet" package, to predict streamflow from snow albedo (reflectance of the snow; controls the amount of heat absorbed by the snow, and therefore controls its melt), precipitation, air temperature, and a temporal variable, 'day of the year'. All the above variables are time-series with 4383 values each between the years 2002 and 2013, with daily temporal frequency. Simpler statistical models have not worked because of the complex autocorrelated and lagged relationship between the predictor and predictors.

I have the following questions about building the ANN:

  1. What number of hidden layers should I use when building the model? How does this choice affect the model?
  2. Should I change the 'threshold' parameter from the default (0.01)? My flow values fluctuate between 0.5 and 134.82 cubic-foot per second (cfs), with a mean of 8.5 cfs. Ideally, my flow prediction errors should not be greater than 1-2 cfs.
  3. Will the choice of algorithm affect the prediction accuracy?
  4. Should I change any of the other parameters in neuralnet?
  5. Should I include any other variables (lags, temporal variables etc) in my model?

Also, would any other machine learning or statistical method be more suitable for this task? My data is highly non-linear, with some seasonality every year, and PACF and CCF plots indicate lags at all lag periods between -30 and +30 days.

I would be happy to answer any questions about the data, or about what I've already tried (GAMs, GLMs, Decision Trees and Random Forests). Thank you.

$\endgroup$
  • $\begingroup$ I like this question, but sounds like a typical NN homework ! All these questions are answered in any nn tutorials on line ! I hope I am not discouraging you to learn for your question, by this comment. $\endgroup$ – user4581 Apr 29 '15 at 18:46
  • $\begingroup$ @user4581 I understand what you mean, but I'm trying to build this model for research-I'm an Environmental Engineer, so my neural network knowledge is very limited. I have tried to find online tutorials for performing time series regression using the neuralnet package, but most of them seem geared towards logistic regression or classification. Also none of them provide a subjective explanation about choosing the parameters. $\endgroup$ – small_world Apr 29 '15 at 18:52
  • $\begingroup$ try to estimate y=sin(x) function - train the modelby x and y from 0 to pi/2 ... and test from 0 to pi ! see how you predict y from x=[0,pi] ... I bet if you spend 1 more hour on google, you would find some really cool materials :D $\endgroup$ – user4581 Apr 29 '15 at 19:38
  • $\begingroup$ @user4581 Thank you. I have already searched for a lot more than 1 hour, and couldn't find the right answers. But I will try again. I'm trying to run the network with various numbers of hidden neurons, but I keep getting this error: "Warning message: algorithm did not converge in 1 of 1 repetition(s) within the stepmax." Why might this be happening? $\endgroup$ – small_world Apr 29 '15 at 19:57
1
$\begingroup$

I think this question is a bit too grand in scope. I'll point out a few things I think will be helpful and then try to answer your more specific questions afterward.

Firstly, your problem is somewhat ill-defined -- the first questions should be qualitative ones, that is, what are you predicting, and what do you believe are informative predictors? It seems unlikely to me that any of those daily unfiltered predictors have any discernible relationship with the unfiltered daily response. Rather, I would expect that some filtering (perhaps a moving average of some sort) of the inputs and output might yield a relationship. As a concrete example, I would find it reasonable that the 10-day average albedo might be strongly correlated with the 10-day average flow. It all depends on how long it takes for melting snow (or precipitation, etc.) to reach the point of flow measurement. Unless this is something you've already figured out or addressed with some rigor, I would recommend going back and trying GAMs again after filtering your predictors and response. In the natural sciences, where there may be some a priori sense of which variable interactions are important, these methods can be pretty effective. And even if not, you may learn something useful that will guide your next steps.

That aside:

1) (Note: I'm assuming you are dealing strictly with sigmoidal hidden neurons) Start with one. Given the data as you describe it, it's highly unlikely that you will benefit from additional layers. Multiple layers are generally appropriate only for vast datasets in which complex variable interactions are expected. There are a ton of heuristics out there for selecting the number of neurons and layers, and almost all of them were derived from one specific problem and are therefore false. Nevertheless, I maintain that a single hidden layer (or zero hidden layer, as per my earlier suggestion to revisit simpler modeling tools) network is more than capable of capturing the predictor/response relationships in your data -- provided the data are preprocessed appropriately.

2) Based on my reading of the 'neuralnet' PDF (https://cran.r-project.org/web/packages/neuralnet/neuralnet.pdf), it appears that the 'threshold' argument is really a relative tolerance on the loss improvement. There's really no way to answer this question without some trial and error. I would plot the value of the loss function against the number of iterations and look for a relationship. As the threshold value gets smaller, the value of the (training) loss at the end of training will tend to decrease with it. Note that this doesn't necessarily indicate a better model; see my comments below regarding over-fitting.

3) Not sure what you mean by "choice of algorithm" -- do you mean the algorithm used to compute gradients and updates? If so, the answer is a definitive "maybe."

4) As for the other parameters, there is no succinct answer to this. Generally some judiciously applied L2 weight regularization is a good bet. But it depends on your stopping criteria and model validation technique as well.

5) Again, a definitive "maybe." As the subject matter expert I think this is something you will be able to answer for yourself with some subject-specific analysis; "data" people can't help you here.

Additional comments:

Stopping criteria and over-fitting: Are you using in-sample loss to determine when to stop training? I would highly discourage doing so, because a sufficiently "wide" (number of neurons) network may just be able to effectively memorize (over-fit) the training set and give you extremely small loss values, while being totally unable to generalize to new/unseen data. Even if you keep some percentage of the data as a held-out validation set, there is still a great possibility of the aforementioned outcome, because there are so many "knobs" (researcher degrees of freedom) that you may over-fit to the validation set.

Preprocessing: (Note: the following is in addition to the filtering I discussed above, and should be performed after the filtering) Due to the way neural networks are trained, you will want to center and scale all of your predictor and response data (this is especially true when using weight regularization, for reasons beyond the scope of your question and this answer). I recommend converting them to z-scores by subtracting their means and dividing by their standard deviations prior to training. Then when you go to make predictions, you apply (to the new data) the scaling/centering parameters determined during training. This is important because axon weights are drawn from the same random distributions, so if one predictor is on a vastly different scale than another, the initialization process may systematically over/underestimate the weights for one or more inputs. This can really screw up the training process. You should also look into the SD of the distribution from which the initial weight values are drawn; this can affect model performance as well as training time.

$\endgroup$
0
$\begingroup$

Here's some straightforward practical advice for people who are struggling with the same questions. The answer by @Josh is quite elaborate but if you are like me, I wouldn't know how to implement it without some concrete examples. So here we go.

My assumption is that you mean multi-layer perceptrons (MLPs) by neural networks. For all the following, I recommend to use the caret library as it provides a set of tools for benchmarking different models conveniently.

What number of hidden layers should I use when building the model?

You must optimize the network capacity, not the number of hidden layers alone. The network capacity is defined as the number of layers times the number of nodes per layer.

How does this choice affect the model?

There is a trade-off how this choice affects the model's performance: The higher the network capacity, the better it can predict the training data, but the more likely it will overfit them. So you can narrow down by reducing a high network capacity step-by-step, or increasing from a low network capacity. E.g. if you start with one hidden layer, you can also use the nnet library which is much faster than neuralnet.

Should I change the 'threshold' parameter from the default (0.01)?

If the computation takes too long or doesn't converge (RMSE values missing in output), then you should increase it. If waiting time is no problem for you (this is a subjective decision), then you can increase the stepmax parameter from its default value (1e+05). Start with a mild increase, e.g. stepmax = 1e+06 as the computation time will distinctly increase.

Will the choice of algorithm affect the prediction accuracy?

To answer this is definitely out of scope of this question, but the short answer is: Of course :)

Should I change any of the other parameters in neuralnet?

If your goal is to reach the best prediction performance, then it is by far faster to compare with other machine learning models. Random forests and gradient boosting machines are always good benchmarking candidates. With the caret library, you can use the same interface to train the models like this:

library(caret)

training_configuration <- trainControl(method = "repeatedcv", number = 10, repeats = 3)

train(formula1,
      method = "neuralnet",
      data = training.set,
      preProcess = c("center", "scale"),
      threshold = 0.4, # narrow down from 0.5 to 0.1 in steps of 0.1
      stepmax = 1e+06, # increase from default 1e+05 if increasing threshold doesn't help
      trControl = training_configuration,
      # for neuralnet, define the network layers
      tuneGrid = data.frame(layer1 =3, layer2 = 3, layer3 = 3)
)

Should I include any other variables (lags, temporal variables etc) in my model?

Of course. Usually the more features, the better. As you only have a few thousand sample observations, you must then do a little feature engineering:

  1. Remove variables that have zero variance. These have no predictive value. You can detect them simply by sapply(training.data, sd)

  2. Remove highly correlated features, as their predictive information is redundant. You can detect that by a simple correlation plot e.g. corPlot::corPlot(cor(training.data))

Also, would any other machine learning or statistical method be more suitable for this task?

This question is redundant with Will the choice of algorithm affect the prediction accuracy?, see answer above.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.