# How to find the expected distance between two uniformly distributed points?

If I were to define the coordinates $(X_{1},Y_{1})$ and $(X_{2},Y_{2})$ where

$$X_{1},X_{2} \sim \text{Unif}(0,30)\text{ and }Y_{1},Y_{2} \sim \text{Unif}(0,40).$$

How would I find the expected value of the distance between them?

I was thinking, since the distance is calculated by $\sqrt{(X_{1}-X_{2})^{2} + (Y_{1}-Y_{2})^{2}})$ would the expected value just be $(1/30 + 1/30)^2 + (1/40+1/40)^2$?

##problem
x <- runif(1000000,0,30)
y <- runif(1000000,0,40)
Uniform <- as.data.frame(cbind(x,y))
n <- nrow(Uniform)
catch <- rep(NA,n)
for (i in 2:n) {
catch[i] <-((x[i+1]-x[i])^2 + (y[i+1]-y[i])^2)^.5
}
mean(catch, na.rm=TRUE)
18.35855


If I understand correctly what you're looking for, maybe this helps. You're trying to figure out the distance between to random points, who's X values are generated from unif(0,30) and Y values are generated from a unif (0,40). I just created a million RV's from each of those to distributions and then bound the x and the y to create a point for each of them. Then I calculated the distance between point 2 and 1 all the way to the distance between points 1,000,000 and 999,999. The average distance was 18.35855. Let me know if this isn't what you were looking for.

• Took the liberty of editing for formatting. – curious_cat Mar 21 '13 at 13:01
• You came fairly close--perhaps by chance. The true answer is $\frac{1}{108} (871+960 \log(2)+405 \log(3))$ = $18.345919\ldots$. Your code has two problems: (1) the iterations are not mutually independent; and (2) to obtain reasonable precision, it ought to be coded to be faster. Why not do the simulation directly, as in n <- 10^7; distance <- sqrt((runif(n,0,30)-runif(n,0,30))^2 + (runif(n,0,40)-runif(n,0,40))^2). That will get you about four significant figures (in less time), as you can check by computing the standard error sd(distance) / sqrt(n). – whuber Mar 21 '13 at 15:32
• @whuber: Can you explain your #1? e.g. say (Case-I) I drew pairs of random numbers from any given distribution and calculated differences and took a mean. Versus (Case-II) I kept drawing one number at a time and kept calculating running differences with respect to the last number draw and then averaged. Would the average reported by Case-I and Case-II be systematically different? – curious_cat Mar 21 '13 at 16:45
• @curious_cat No, the averages would be about the same: but the calculation of the standard error would be different. We need that calculation in order to estimate how close the mean is likely to come to the true value. Rather than work out the more complicated SE calculation, it's simpler just to generate pairs of points completely independently of one another, exactly as stipulated in the question. (There are so many ways a simulation can go wrong--I know from experience!--that it's wise to make the simulation mimic the reality as closely as possible.) – whuber Mar 21 '13 at 16:52
• @whuber: Thanks for clarifying. So, if Clark had run his code longer he might have gotten more decimal places right? – curious_cat Mar 21 '13 at 16:55

It is plain, from looking at the question geometrically, that the expected distance between two independent, uniform, random points within a convex set is going to be a little less than half its diameter. (It should be less because it's relatively rare for the two points to be located within extreme areas like corners and more often the case they will be near the center, where they are close.) Since the diameter of this rectangle is $50$, by this reasoning alone we would anticipate the answer to be a little less than $25$.

An exact answer is obtained from the definition of expectation as the probability-weighted value of the distance. In general, consider a rectangle of sides $1$ and $\lambda$; we will scale it up to the correct size afterwards (by setting $\lambda = 40/30$ and multiplying the expectation by $30$). For this rectangle, using coordinates $(x,y)$, the uniform probability density is $\frac{1}{\lambda}dx dy$. The mean distance within this rectangle then is given by

$$\int_0^\lambda\int_0^1\int_0^\lambda\int_0^1 \sqrt{(x_1-x_2)^2+(y_1-y_2)^2} \frac{1}{\lambda}dx_1 dy_1 \frac{1}{\lambda} dx_2 dy_2.$$

Using elementary integration methods this is straightforward but painful to do; I employed a computer algebra system (Mathematica) to obtain the answer

$$[2+2 \lambda ^5-2 \sqrt{1+\lambda ^2}+6 \lambda ^2 \sqrt{1+\lambda ^2}-2 \lambda ^4 \sqrt{1+\lambda ^2} +5 \lambda \text{ArcSinh}(\lambda)+5 \lambda ^4 \log\left(\frac{1+\sqrt{1+\lambda ^2}}{\lambda }\right)]/(30\lambda^2).$$

The presence of $\sqrt{1+\lambda^2}$ in many of these terms is no surprise: it is the diameter of the rectangle (the maximum possible distance between any two points within it). The appearance of logarithms (which includes the arcsinh) is also unsurprising if you have ever investigated average distances within simple plane figures: somehow it always shows up (a hint of this appears in integral of the secant function). Incidentally, the presence of $30$ in the denominator has nothing to do with the specifics of the problem involving a rectangle of sides $30$ and $40$: it's a universal constant.)

With $\lambda=4/3$ and scaling up by a factor of $30$, this evaluates to $\frac{1}{108} (871+960 \log(2)+405 \log(3)) \approx 18.345919\ldots$.

One way to understand the situation more deeply is to plot the mean distance relative to the diameter of $\sqrt{1+\lambda^2}$ for varying values of $\lambda$. For extreme values (near $0$ or much greater than $1$), the rectangle becomes essentially one-dimensional and a more elementary integration indicates the mean distance should reduce to one-third the diameter. Also, because the shapes of rectangles with $\lambda$ and $1/\lambda$ are the same, it is natural to plot the result on a logarithmic scale of $\lambda$, where it must be symmetric about $\lambda=1$ (the square). Here it is: With this we learn a rule of thumb: the mean distance within a rectangle is between $1/3 \approx 0.33$ and (approximately) $0.37$ of its diameter, with the larger values associated with squarish rectangles and the smaller values associated with long skinny (linear) rectangles. The midpoint between these extremes is achieved roughly for rectangles with aspect ratios of $3:1$. With this rule in mind, you can just glance at a rectangle and estimate its mean distance to two significant figures.

• Should that be "diagonal" instead of "diameter"? Sorry if I am nitpicking. – curious_cat Mar 21 '13 at 17:16
• @curious_cat By definition, the diameter of a set of points (in any metric space) is the supremum of the distances between any two points in it. For a rectangle it is (obviously) the length of a diagonal. – whuber Mar 21 '13 at 17:19
• Thanks! I did not realize that. I was using a naive concept of diameter. – curious_cat Mar 21 '13 at 17:24
• As an aside: For all rectangles of given area would the mean distance be minimized for a square? – curious_cat Mar 21 '13 at 17:26
• In the spirit of this, I wish you would have started this answer with "It is plane ..." (+1) – cardinal Mar 21 '13 at 17:49