The Stack Overflow podcast is back! Listen to an interview with our new CEO.

Questions tagged [regression]

Techniques for analyzing the relationship between one (or more) "dependent" variables and "independent" variables.

2,679 questions
Filter by
Sorted by
Tagged with
153k views

How to deal with perfect separation in logistic regression?

If you have a variable which perfectly separates zeroes and ones in target variable, R will yield the following "perfect or quasi perfect separation" warning message: ...
107k views

When is it ok to remove the intercept in a linear regression model?

I am running linear regression models and wondering what the conditions are for removing the intercept term. In comparing results from two different regressions where one has the intercept and the ...
32k views

What if residuals are normally distributed, but y is not?

I've got a weird question. Assume that you have a small sample where the dependent variable that you're going to analyze with a simple linear model is highly left skewed. Thus you assume that $u$ is ...
30k views

Is $R^2$ useful or dangerous?

I was skimming through some lecture notes by Cosma Shalizi (in particular, section 2.1.1 of the second lecture), and was reminded that you can get very low $R^2$ even when you have a completely linear ...
13k views

Principled way of collapsing categorical variables with many levels?

What techniques are available for collapsing (or pooling) many categories to a few, for the purpose of using them as an input (predictor) in a statistical model? Consider a variable like college ...
72k views

Does an unbalanced sample matter when doing logistic regression?

Okay, so I think I have a decent enough sample, taking into account the 20:1 rule of thumb: a fairly large sample (N=374) for a total of 7 candidate predictor variables. My problem is the following: ...
29k views

What is the benefit of breaking up a continuous predictor variable?

I'm wondering what the value is in taking a continuous predictor variable and breaking it up (e.g., into quintiles), before using it in a model. It seems to me that by binning the variable we lose ...
317k views

In linear regression, when is it appropriate to use the log of an independent variable instead of the actual values?

Am I looking for a better behaved distribution for the independent variable in question, or to reduce the effect of outliers, or something else?
15k views

Is there a difference between 'controlling for' and 'ignoring' other variables in multiple regression?

The coefficient of an explanatory variable in a multiple regression tells us the relationship of that explanatory variable with the dependent variable. All this, while 'controlling' for the other ...
35k views

What is a complete list of the usual assumptions for linear regression?

What are the usual assumptions for linear regression? Do they include: a linear relationship between the independent and dependent variable independent errors normal distribution of errors ...
193k views

How exactly does one “control for other variables”?

Here is the article that motivated this question: Does impatience make us fat? I liked this article, and it nicely demonstrates the concept of “controlling for other variables” (IQ, career, income, ...
69k views

Including the interaction but not the main effects in a model

Is it ever valid to include a two-way interaction in a model without including the main effects? What if your hypothesis is only about the interaction, do you still need to include the main effects?
48k views

Interpretation of log transformed predictor and/or response

I'm wondering if it makes a difference in interpretation whether only the dependent, both the dependent and independent, or only the independent variables are log transformed. Consider the case of <...
64k views

How can a regression be significant yet all predictors be non-significant? [duplicate]

My multiple regression analysis model has a statistically significant F value however all beta values are statistically non-significant. All the regression assumptions are met. No multicollinearity ...
18k views

Why isn't Logistic Regression called Logistic Classification?

Since Logistic Regression is a statistical classification model dealing with categorical dependent variables, why isn't it called Logistic Classification? Shouldn't the "Regression" name be reserved ...
5k views

Goodness of fit and which model to choose linear regression or Poisson

I need some advice regarding two main dilemmas in my research, which is a case study of 3 big pharmaceuticals and innovation. Number of patents per year is the dependent variable. My questions are ...
28k views

How can adding a 2nd IV make the 1st IV significant?

I have what is probably a simple question, but it is baffling me right now, so I am hoping you can help me out. I have a least squares regression model, with one independent variable and one ...
166k views

Interpretation of R's lm() output

The help pages in R assume I know what those numbers mean, but I don't. I'm trying to really intuitively understand every number here. I will just post the output and comment on what I found out. ...
23k views

Interpretation of simple predictions to odds ratios in logistic regression

I'm somewhat new to using logistic regression, and a bit confused by a discrepancy between my interpretations of the following values which I thought would be the same: exponentiated beta values ...
173k views

What is the difference between linear regression on y with x and x with y?

The Pearson correlation coefficient of x and y is the same, whether you compute pearson(x, y) or pearson(y, x). This suggests that doing a linear regression of y given x or x given y should be the ...
8k views

Question on how to normalize regression coefficient

Not sure if normalize is the correct word to use here, but I will try my best to illustrate what I am trying to ask. The estimator used here is least squares. Suppose you have $y=\beta_0+\beta_1x_1$, ...
19k views

Can a random forest be used for feature selection in multiple linear regression?

Since RF can handle non-linearity but can't provide coefficients, would it be wise to use random forest to gather the most important features and then plug those features into a multiple linear ...
13k views

Logistic regression in R resulted in perfect separation (Hauck-Donner phenomenon). Now what?

I'm trying to predict a binary outcome using 50 continuous explanatory variables (the range of most of the variables is $-\infty$ to $\infty$). My data set has almost 24,000 rows. When I run ...
46k views

Why is it possible to get significant F statistic (p<.001) but non-significant regressor t-tests?

In a multiple linear regression, why is it possible to have a highly significant F statistic (p<.001) but have very high p-values on all the regressor's t tests? In my model, there are 10 ...
21k views

How to visualize what canonical correlation analysis does (in comparison to what principal component analysis does)?

Canonical correlation analysis (CCA) is a technique related to principal component analysis (PCA). While it is easy to teach PCA or linear regression using a scatter plot (see a few thousand examples ...
30k views

Box-Cox like transformation for independent variables?

Is there a Box-Cox like transformation for independent variables? That is, a transformation that optimizes the $x$ variable so that the y~f(x) will make a more ...
22k views

Regression for an outcome (ratio or fraction) between 0 and 1

I am thinking of building a model predicting a ratio $a/b$, where $a \le b$ and $a > 0$ and $b > 0$. So, the ratio would be between $0$ and $1$. I could use linear regression, although it doesn'...
19k views

How does centering the data get rid of the intercept in regression and PCA?

I keep reading about instances where we center the data (e.g., with regularization or PCA) in order to remove the intercept (as mentioned in this question). I know it's simple, but I'm having a hard ...
73k views

Interpreting plot.lm()

I had a question about interpreting the graphs generated by plot(lm) in R. I was wondering if you guys could tell me how to interpret the scale-location and leverage-residual plots? Any comments ...
19k views

How to tell the difference between linear and non-linear regression models?

I was reading the following link on non linear regression SAS Non Linear. My understanding from reading the first section "Nonlinear Regression vs. Linear Regression" was that the equation below is ...
71k views

Regression when the OLS residuals are not normally distributed

There are several threads on this site discussing how to determine if the OLS residuals are asymptotically normally distributed. Another way to evaluate the normality of the residuals with R code is ...
16k views

Bayesian logit model - intuitive explanation?

I must confess that I previously haven't heard of that term in any of my classes, undergrad or grad. What does it mean for a logistic regression to be Bayesian? I'm looking for an explanation with a ...
112k views

How to calculate Area Under the Curve (AUC), or the c-statistic, by hand

I am interested in calculating area under the curve (AUC), or the c-statistic, by hand for a binary logistic regression model. For example, in the validation dataset, I have the true value for the ...
42k views

Should covariates that are not statistically significant be 'kept in' when creating a model?

I have several covariates in my calculation for a model, and not all of them are statistically significant. Should I remove those that are not? This question discusses the phenomenon, but does not ...
6k views

Obtaining a formula for prediction limits in a linear model (i.e.: prediction intervals)

Let's take the following example: set.seed(342) x1 <- runif(100) x2 <- runif(100) y <- x1+x2 + 2*x1*x2 + rnorm(100) fit <- lm(y~x1*x2) This creates a ...
90k views

What does having “constant variance” in a linear regression model mean?

What does having "constant variance" in the error term mean? As I see it, we have a data with one dependent variable and one independent variable. Constant variance is one of the assumptions of linear ...
21k views

Why is polynomial regression considered a special case of multiple linear regression?

If polynomial regression models nonlinear relationships, how can it be considered a special case of multiple linear regression? Wikipedia notes that "Although polynomial regression fits a nonlinear ...
17k views

Is there a way to use the covariance matrix to find coefficients for multiple regression?

For simple linear regression, the regression coefficient is calculable directly from the variance-covariance matrix $C$, by $$C_{d, e}\over C_{e,e}$$ where $d$ is the dependent variable's index, ...
137k views

How are the standard errors of coefficients calculated in a regression?

For my own understanding, I am interested in manually replicating the calculation of the standard errors of estimated coefficients as, for example, come with the output of the ...
258k views

What is the difference between linear regression and logistic regression?

What is the difference between linear regression and logistic regression? When would you use each?
66k views

What correlation makes a matrix singular and what are implications of singularity or near-singularity?

I am doing some calculations on different matrices (mainly in logistic regression) and I commonly get the error "Matrix is singular", where I have to go back and remove the correlated variables. My ...
107k views

PCA and proportion of variance explained

In general, what is meant by saying that the fraction $x$ of the variance in an analysis like PCA is explained by the first principal component? Can someone explain this intuitively but also give a ...
54k views

Does it make sense to add a quadratic term but not the linear term to a model?

I have a (mixed) model in which one of my predictors should a priori only be quadratically related to the predictor (due to the experimental manipulation). Hence, I would like to add only the ...
20k views

Continuous dependent variable with ordinal independent variable

Given a continuous dependent variable y and independent variables including an ordinal variable X1, how do I fit a linear model in R? Are there papers about this ...
5k views

How to model this odd-shaped distribution (almost a reverse-J)

My dependent variable shown below doesn't fit any stock distribution that I know of. Linear regression produces somewhat non-normal, right-skewed residuals that relate to predicted Y in an odd way (...
4k views

How can top principal components retain the predictive power on a dependent variable (or even lead to better predictions)?

Suppose I am running a regression $Y \sim X$. Why by selecting top $k$ principle components of $X$, does the model retain its predictive power on $Y$? I understand that from dimensionality-reduction/...
1k views

Definition and delimitation of regression model

An embarrassingly simple question -- but it seems it has not been asked on Cross Validated before: What is the definition of a regression model? Also a support question, What is not a regression ...
24k views

Why does the Lasso provide Variable Selection?

I've been reading Elements of Statistical Learning, and I would like to know why the Lasso provides variable selection and ridge regression doesn't. Both methods minimize the residual sum of squares ...
I am having some issues with the derivation of the solution for ridge regression. I know the regression solution without the regularization term: $$\beta = (X^TX)^{-1}X^Ty.$$ But after adding the ...
If the best linear approximation (using least squares) of my data points is the line $y=mx+b$, how can I calculate the approximation error? If I compute standard deviation of differences between ...